Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

0

Wax Bullets, Shells, & Accessories

Dead Eye EZ Loader Wax Bullets

 

 

ABOUT DEAD EYE EZ LOADERS

            Dead Eye EZ Loader Wax Bullets have become the most popular wax bullet used in major championship competitions in the past few years.

            This wax bullet was especially designed for easy loading by hand or loading press.  The unique “Boat Tail” design, the tapered end goes into the casing first, is the fastest, easiest and most consistent loading bullet on the market. 

            EZ Loaders also feature a compression ring at the front that snaps the bullet right into place. It can also easily be pushed further into the brass casing, without fracturing the bullet, which reduces casing capacity.  This not only provides for increased velocity, but also a reduced velocity variant.

            The Boat Tail/Front Wad Cutter Design reduces the turbulence and produces a straighter flying bullet. These wax bullets are second to none for accuracy.  Wax bullets are a great marksmanship training tool for any handgun.  Since there is no recoil they are especially affective for learning how to overcome a  flinching problem.

            The melting point of this bullet is higher than some other brands on the market, 190 degrees, but not so high as to damage archery netting. The EZ Loader is designed to break apart on impact with a hard surface.  The wax/polyethylene formula allows for the least amount of waxing in the barrel rifling lands.

EZ OUT WAX BULLET SOLVENT

            The oil-based wax will not harm firearms and while it cleans with most gun cleaning solvents on the market, we manufacture a solvent that is specially designed to be effective for wax bullets called EZ Out Wax Bullet Solvent.

Wax Bullet Brass

            CFDA has a complete line of brass that is specially produced for firing wax bullets.  In Cowboy Fast Draw the most popular method is powering wax bullets in .45 Colt brass with shotgun primers.  Our CFDA Shotgun Primer Brass is exclusively manufactured for this purpose and is not drilled or modified.  It is simply the best there is on the market.  We also do modify nickel plated brass in both .45 Colt and .38 Special to accept large pistol primers that drop-in and fall- out like our Shotgun Primer Brass, so no loading tools are required.  We do not offer .38 Shotgun Primer Brass, as the shotgun primers propel the .38 wax bullets at almost 1,000 fps.  We do not carry what we do not recommend.       

209 SHOTGUN PRIMERS

            We recommend RIO, Nobel Sport, Wolf, and Fiocchi.  Most other brands of 209 shotgun primers have a problem with the center hull backing out and causing a cylinder to jamb.

 

Lead Warning:  Even though wax bullets do not contain lead, most brands of primers that are used to power wax bullets do.  Make use to use wax bullet ammunition outdoors or in a well ventilated area.

Warning!:  Wax bullets travel at over 600 fps, when only powered by a shotgun primer; they are not toys!  Wax bullet ammunition must be handled with extreme care, they can cause property damage and/or bodily injury.  NEVER POINT A FIREARM AT ANYTHING, THAT YOU'RE NOT WILLING TO DESTROY!

Items 1 to 10 of 21 total

Page:
  1. 1
  2. 2
  3. 3

Grid  List 

  1. A.) Dead Eye E-Z Loader Wax Bullets 500ct

    A.) Dead Eye E-Z Loader Wax Bullets 500ct

    The bullet is a “Boat Tail” design, and it almost seems like the bullets are going into the casings backwards, since the tapered end goes in first. This provides for a very easy loading process and once it reaches the front compression ring of the bullet, it snaps right into place. It can also easily be pushed further into the brass casing to reduce the case capacity and increase the velocity of the bullet. The Boat Tail/Front Wad Cutter Design reduces the turbulence and produces a straighter flying bullet. The melt point of the bullet is higher than some others on the market, but not so high as to damage archery netting. The projectile breaks apart on impact and the wax-polyethylene formula allows for the least amount of waxing in the barrel rifling. Try ‘Em, You’ll Love ‘Em!!!

    Available in either .45 or .38 Caliber

    Wearing eye protection during any shooting activity, including the use of wax bullets, is required.

    Price (per 500): $13.00 + s/h

    Delivery Time: 1-2 weeks

    Learn More
    $14.99
  2. U2.) EZ Wax Bullet Barrel Mop

    U2.) EZ Wax Bullet Barrel Mop

    NEW PRODUCT!

    EZ Wax Bullet Barrel Mop

    The EZ Barrel Mop makes the final cleanup even handier, quicker and easier than using multiple patches on brushes. The Barrel Mop can be cleaned as needed with soap and hot water.

    Available in .45 and .38 caliber

    Learn More
    $12.99
  3. EZ Wax Bullet Nylon Brushes (2 Pack)

    V1) EZ Wax Bullet Nylon Brush (2 Pack)

    NEW PRODUCT!

    EZ Wax Bullet Nylon Brush (2 Pack)

    Our new brush is a 6" Nylon Brush that works extremely well on wax build-up on lands of barrel riffling. When shooting wax bullets in any firearm the barrel should be brushed often (about every 15 - 20 rounds), when cleaning barrels this often nylon brushes should be used. This is the best brush we have found!

    Available in .45 and .38 caliber

    Learn More
    $19.99
  4. EZ Wax Bullet Nylon Brush

    V2) EZ Wax Bullet Nylon Brush

    NEW PRODUCT!

    EZ Wax Bullet Nylon Brush

    Our new brush is a 6" Nylon Brush that works extremely well on wax build-up on lands of barrel riffling. When shooting wax bullets in any firearm the barrel should be brushed often (about every 15 - 20 rounds), when cleaning barrels this often nylon brushes should be used. This is the best brush we have found!

    Available in .45 and .38 caliber

    Learn More
    $12.99
  5. Nylon Brush & Brush Mop Combo

    V3) EZ Wax Bullet Nylon Brush & Barrel Mop Combo

    NEW PRODUCT!

    EZ Wax Nylon Brush & Barrel Mop Combo

    Our new brush is a 6" Nylon Brush that works extremely well on wax build-up on lands of barrel riffling. When shooting wax bullets in any firearm the barrel should be brushed often (about every 15 - 20 rounds), when cleaning barrels this often nylon brushes should be used. This is the best brush we have found! The EZ Barrel Mop makes the final cleanup even handier, quicker and easier than using multiple patches on brushes. Both the Nylon Brush and Barrel Mop can be cleaned as needed with soap and hot water.

    Available in .45 and .38 caliber

    Learn More
    $19.99
  6. EZ Wax Bullet Brush Mops (2 Pack)

    U1) EZ Wax Bullet Barrel Mop (2 Pack)

    NEW PRODUCT!

    EZ Wax Bullet Barrel Mop (2 Pack)

    The EZ Barrel Mop makes the final cleanup even handier, quicker and easier than using multiple patches on brushes. The Brush Mop can be cleaned as needed with soap and hot water.

    Available in .45 and .38 caliber

    Learn More
    $19.99
  7. B.) Dead Eye E-Z Loader Wax Bullets 1000ct

    B.) Dead Eye E-Z Loader Wax Bullets 1000ct

    .38 or .45 Dead Eye E-Z Loader Wax Bullets
    Perfect for Indoor Cowboy Action Shooting Practice!

     

    The bullet is a “Boat Tail” design, and it almost seems like the bullets are going into the casings backwards, since the tapered end goes in first. This provides for a very easy loading process and once it reaches the front compression ring of the bullet, it snaps right into place. It can also easily be pushed further into the brass casing to reduce the case capacity and increase the velocity of the bullet. The Boat Tail/Front Wad Cutter Design reduces the turbulence and produces a straighter flying bullet. The melt point of the bullet is 190 degrees, higher than most others on the market, but not so high as to damage archery netting. The projectile breaks apart on impact and the wax-polyethylene formula allows for the least amount of waxing in the barrel rifling. Try ‘Em, You’ll Love ‘Em!!!Available in either .45 or .38 Caliber

    Wearing eye protection during any shooting activity, including the use of wax bullets, is required.

    Price (per 1,000): + s/h

    Delivery Time: 1-2 weeks

    Learn More
    $26.00
  8. C.) Dead Eye E-Z Loader Wax Bullets 4000ct

    C.) Dead Eye E-Z Loader Wax Bullets 4000ct

    The bullet is a “Boat Tail” design, and it almost seems like the bullets are going into the casings backwards, since the tapered end goes in first. This provides for a very easy loading process and once it reaches the front compression ring of the bullet, it snaps right into place. It can also easily be pushed further into the brass casing to reduce the case capacity and increase the velocity of the bullet. The Boat Tail/Front Wad Cutter Design reduces the turbulence and produces a straighter flying bullet. The melt point of the bullet is higher than some others on the market, but not so high as to damage archery netting. The projectile breaks apart on impact and the wax-polyethylene formula allows for the least amount of waxing in the barrel rifling. Try ‘Em, You’ll Love ‘Em!!!

    Available in either .45 or .38 Caliber

    Wearing eye protection during any shooting activity, including the use of wax bullets, is required.

    Bulk Price $95.00 + s/h  Shipped in Medium Flat Rate Box

    Delivery Time: 1-2 weeks

    Learn More
    $95.00
  9. D.) Dead Eye E-Z Loaders Wax Bullets 6000ct

    D.) Dead Eye E-Z Loaders Wax Bullets 6000ct

    The bullet is a “Boat Tail” design, and it almost seems like the bullets are going into the casings backwards, since the tapered end goes in first. This provides for a very easy loading process and once it reaches the front compression ring of the bullet, it snaps right into place. It can also easily be pushed further into the brass casing to reduce the case capacity and increase the velocity of the bullet. The Boat Tail/Front Wad Cutter Design reduces the turbulence and produces a straighter flying bullet. The melt point of the bullet is higher than some others on the market, but not so high as to damage archery netting. The projectile breaks apart on impact and the wax-polyethylene formula allows for the least amount of waxing in the barrel rifling. Try ‘Em, You’ll Love ‘Em!!!

    Available in either .45 or .38 Caliber

    Wearing eye protection during any shooting activity, including the use of wax bullets, is required.

    Bulk Price $129.00 + s/h  Shipped in Large Flat Rate Box

    Delivery Time: 1-2 weeks

    Learn More
    $129.00
  10. E.) .45 Shotgun Primer Nickel Cases - 50ct

    E.) .45 Shotgun Primer Nickel Cases - 50ct

    NO LOADING TOOLS NEEDED! Nickel .45 Colt Shells for Shotgun Primers for use with wax bullets and cowboy fast draw.  These cases are manufactured exclusively for the Cowboy Fast Draw Association.  They are used for both practice and competition and since very little pressure is generated, they can be reused over and over. The primer pocket is factory made to accept a 209 shotgun primer, they will fall into the pocket and easily drops out after firing. Note: Proper brands of 209 Shotgun Primers must be used, otherewise the center portion of the shotgun primer may back out and cause the revolver cylinder to jamb.  Acceptable brands of Shotgun Primers are RIO, Fiocchi, Nobel Sport, Wolf & TulAmmo.  CFDA General Store does not sell Shotgun Primers.

    Price (case of 50): $40.00  

     

    Delivery Time: 1-2 weeks

    Learn More
    $40.00

Items 1 to 10 of 21 total

Page:
  1. 1
  2. 2
  3. 3

Grid  List 

© Cowboy Fastdraw Association. All Rights Reserved.